CONTROL PANEL¶

Make sure your PocketVJ is powered up and running.
On your computer, phone or tablet, go to the wifi and connect to your PocketVJ’s Wifi network. Its named vj100 or something similar starting with vj___.

Enter the password fot the wifi connection (its printed onto the paper card) and wait until the connection is established.

Open a web-browser (use chrome) and enter into the wifi ip of your PocketVJ into the address bar: ‘’http://2.0.0.100’’ (this is depending on wifi name, see on the printed card). You see the Control Panel:

Note

Alternatively you can connect your PocketVJ via wired network.
Make sure your router is configured to 192.168.2.1. Access via address: http://192.168.2.***
If you lost the sticker with the IP address, go to “Network Settings” and click ‘Display IP’.
There are some known issues with Safari / Edge / IE browsers = Use Chrome and its derivates.

SHORTLINKS¶

The Control Panel shows you a bunch of shortlinks and colored tabs:

The shortlinks from left to right are:

STOP => Stops all running tasks.

PLAY => Starts the Videoplayer as Master

PAUSE => Pause Video / Mapping

FASTFORWARD => Jump 20 Seconds forward in video

FILEBROWSER => Open FIlebrowser

SCREENSHOT => Take a screenshot of the current output, stores under images

TESTSCREEN => Display a testscreen

RESOLUTION CHECK => Check the current used resolution of the attached device

REBOOT => Reboots (make sure to close your browser widow to prevent boot loops!)

POWEROFF => Shuts down the PocketVJ

Below the shortlinks you have the Output Window which will display messages from selected functions:

The colored tabs contain the various control sections:

which are explained on the following pages.