.. _networksettings:



NETWORK SETTINGS
================


.. image:: _images/13_CP_networksettings.png


INFO
******

CHANGE IP
*********

**192.168.2.** => Sets the ip range to ``192.168.2.***`` (reverts from dhcp)

**10.0.0.0.** => Set the ip range to ``10.0.0.0.***`` (reverts from dhcp)

**RJ45 DHCP** => Sets the rj45 connection to dhcp to get the ip address from a router



REMOTE ACCESS
*************

see video tutorial: https://www.pocketvj.com/pocketvj-exhibitiont



CP PASSWORD
***********

Used to lock the Control Panel and the content with a password.

Username: ``admin``
Pass: ``12345``

**Enable** => Enables the CP password

**Disable** => Disables the CP password

**Entry Filed** => Set your own password

.. image:: _images/13_CP_password.png






CONNECTING TO WIFI
*******************

Used to connect to an in house Wifi with internet so you can accesss from anywhere.

.. image:: _images/13_CP_connectwifi.png

see video tutorial: https://www.pocketvj.com/pocketvj-exhibition


.. note::
    When connecting to your in-house wifi, there will be no longer a "vj100" hotspot available, so you must make sure to have internet and beeing able to
    remote connect to the device, otherwhise you will lock yourself out!

    **Booting will take a bit longer, since it waits until wifi is connected!**

    After remote accessing with the given ip address shipped with your unit, you can go to "Network Settings" and check the units Wifi IP to access it again directly within your network.

WIFI ANTENNA
************

Enable or disable the internal wifi


.. image:: _images/13_CP_wifiantenna.png


**ON** => Turns wifi on

**ON Permanent** => Turns wifi on also after reboot

**OFF** => Turns wifi and bluetooth off until next reboot

**OFF Permanent** => Turns wifi and bluetooth off  forever


WIFI CHANNEL
************

Change Wifi channels, useful when using multiple PocketVJ's in public spaces to split up the frequencies.


UDP Control
***********

You can control the PocketVJ with UDP commands. On port ``5000``

**Uppercase and lowercase matters!**


When using Packetsender or similar, make sure to send a "Newline" after every command, 

e.g:   ``stop\n``

see here: https://docs.allthingstalk.com/developers/api/udp-messaging/


.. image:: _images/13_udp_packetsender.png


The commands are defined in: https://github.com/magdesign/PocketVJ-CP-exh/blob/master/sync/commandmapping.sh


Ask if you need more control commands and I will add them or edit the file by yourself.



TCP Controouse Wifi with internet so you can accesss from anywhere. example using curl via terminal to control a PocketVJ with the IP: 2.0.0.100

``curl -s http://2.0.0.100/backend.php/?action=stop``

IP://X.X.X:X/backend.php/?action=..............

For more commands check backend.php
Every function is controllable via TCP!